All Issue

2018 Vol.34, Issue 11 Preview Page

Research Article

30 November 2018. pp. 21-31
Abstract
References
1
Allersma, H.G.B., Plenevaux, F.J.A., and Wintgens, J.F. (1997), "Simulation of Suction Pile Installation in Sand in a Geocentrifuge", Proceedings of the 7th International Offshore and Polar Engineering Conference, Honolulu, USA, pp.761-766.
2
Andersen, K.H., Murff, J.D., Randolph, M.F., Clukey, E.C., Erbrich, C.T., Jostad, H.P., Hansen, B., Aubeny, C., Sharma, P., and Supachawarote, C. (2005), "Suction Anchors for Deepwater Applications", Proceeding of International Symposium on Frontiers in Offshore Geotechnics, Perth, Australia, pp.3-30.
3
Andersen, K.H., Jostad, H.P., and Dyvik, R. (2008), "Penetration Resistance of Offshore Skirted Foundations and Anchors in Dense Sand", Journal of Geotechnical and Geoenvironmental Engineering, Vol.134, No.1, pp.106-116.
10.1061/(ASCE)1090-0241(2008)134:1(106)
4
American Society for Testing and Materials (ASTM). (2006), "Standard Test Method for Minimum Index Density and Unit Weight of Soils and Calculation of Relative Density", ASTM D4254-00, West Conshohoken, PA.
5
American Society for Testing and Materials (ASTM). (2011), "Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System)", ASTM D2487-11, West Conshohoken, PA.
6
American Society for Testing and Materials (ASTM). (2014), "Standard Test Methods for Maximum Index Density and Unit Weight of Soils Using a Vibratory Table", ASTM D4253-14, West Conshohoken, PA.
7
Bang, S., Cho, Y., Preber, T., and Thomason, J. (1999), "Model Testing and Calibration of Suction Pile Installation in Sand", Proceedings of the 11th Asian Regional Conference on Soil Mechanics and Geotechnical Engineering, Seoul, Korea, pp.235-256.
8
Bang, S., Preber, T., Cho, Y., Thomason, J., Karnoski, S.R., and Taylor, R.J. (2000), "Suction Piles for Mooring of Mobile Offshore Bases", Marine Structures, Vol.13, No.5. pp.367-382.
10.1016/S0951-8339(00)00012-5
9
Cotter, O. (2010), "Installation of Suction Caisson Foundations for Offshore Renewable Energy Structures", PhD thesis, Oxford University, UK.
10
Erbrich, C.T. and Tjelta, T.I. (1999), "Installation of Bucket Foundations and Suction Caissons in Sand-geotechnical Performance", Offshore Technology Conference, Houston, USA, paper OTC 10990.
10.4043/10990-MS
11
Houlsby, G.T. and Byrne, B.W. (2005), "Design Procedures for Installation of Suction Caissons in Sand", Proceedings of the Institution of Civil Engineers. Geotechnical Engineering, Vol.158, No.3, pp.135-144.
10.1680/geng.2005.158.3.135
12
Iskander, M., El-Gharbawy, S., and Olson, R. (2002), "Performance of Suction Caissons in Sand and Clay", Canadian Geotechnical Journal, Vol.39, No.3, pp.576-584.
10.1139/t02-030
13
Kim, J.H. (2016), "Model Testing of Bucket Foundations for Offshore Structure in the Centrifuge and Development of Miniature Cone", PhD thesis, Korea Advanced Institute of Science and Technology (KAIST), Korea.
14
Kim, J.H., Choo, Y.W., Kim, D.J., and Kim, D.S. (2016), "Miniature Cone Tip Resistance on Sand in a Centrifuge", Journal of Geotechnical and Geoenvironmental Engineering, Vol.142, No.3, 04015090.
10.1061/(ASCE)GT.1943-5606.0001425
15
Kim, J.H., Lee, S.T., and Kim, D.S. (2017), "Observation of Sand Movement during Bucket Installation", International Journal of Physical Modelling in Geotechnics (ahead of print).
16
Kumara, J. J., Kikuchi, Y., and Kurashina, T. (2016), "Effects of the Lateral Stress on the Inner Frictional Resistance of Pipe Piles Driven into Sand", International Journal of Geo-Engineering, Volume 7, Paper no. 1, DOI 10.1186/s40703-016-0015-x
17
Larsen, K.A., Ibsen, L.B., and Barari, A. (2013), "Modified Expression for the Failure Criterion of Bucket Foundations Subjected to Combined Loading", Canadian Geotechnical Journal, Vol.50, No.12, pp.1250-1259.
10.1139/cgj-2012-0308
18
Senpere, D. and Auvergne, G.A. (1982), "Suction Anchor Piles - A Proven Alternative to Driving or Drilling", Offshore Technology Conference, Houston, USA, Paper OTC 4206.
10.4043/4206-MS
19
Tjelta, T.I. (1995), "Geotechnical Experience from the Installation of the Europipe Jacket with Bucket Foundations", Offshore Technology, Conference, Houston, USA, Paper OTC 7795.
20
Tjelta, T.I., Guttormsen, T.R., and Hermstad, J. (1986), "Large-scale Penetration Test at a Deepwater Site", Offshore Technology Conference, Houston, USA, Paper OTC 5103.
10.4043/5103-MS
21
Tran, M.N. (2005), "Installation of Suction Caissons in Dense Sand and the Influence of Silt and Cemented Layers", PhD thesis, University of Sydney, Australia.
22
Tran, M.N. and Randolph, M.F. (2008), "Variation of Suction Pressure during Caisson Installation in Sand", Géotechnique, Vol.58, No.1, pp.1-11.
10.1680/geot.2008.58.1.1
23
Tran, M.N., Randolph, M.F., and Airey, D.W. (2005), "Study of Seepage Flow and Sand Plug Loosening in Installation of Suction Caissons in Sand", Proceeding of the 15th International Offshore and Polar Engineering Conference (ISOPE), Seoul, Korea, pp. 516-521.
24
Villalobos, F. (2007), "Installation of Suction Caissons in Sand", Proceeding of 6th Chilean Conference of Geotechnics.
Information
  • Publisher :The Korean Geotechnical Society
  • Publisher(Ko) :한국지반공학회
  • Journal Title :Journal of the Korean Geotechnical Society
  • Journal Title(Ko) :한국지반공학회 논문집
  • Volume : 34
  • No :11
  • Pages :21-31
  • Received Date : 2018-09-22
  • Revised Date : 2018-10-09
  • Accepted Date : 2018-10-11