All Issue

2016 Vol.32, Issue 12 Preview Page
31 December 2016. pp. 69-78
Abstract
References

References

1
1.Altaee, A. and Fellenius, B. H. (1994), “Physical Modeling in Sand”, Canadian Geotechnical Journal, Vol.31, No.3, pp.420-431.10.1139/t94-049
3
2.Been, K. and Jefferies, M. G. (1985), “A State Parameter for Sands”, Géotechnique, Vol.35, No.2, pp.99-112.10.1680/geot.1985.35.2.99
3
3.Bransby, M. F. and Randolph, M. F. (1998), “Combined Loading of Skirted Foundations”, Geotechnique, 48, pp.637-655.10.1680/geot.1998.48.5.637
4
4.Byrne, B. W. (2000), “Investigations of Suction Caissons in Dense Sand”, PhD Dissertation, Magdalen College, University of Oxford.
5
5.Cox, J. A., O’Loughlin, C. D., Cassidy, M., Bhattacharya, S., Gaudin, C., and Bienen, B. (2014), “Centrifuge Study on the Cyclic Performance of Caissons in Sand”, International Journal of Physical modelling in Geotechnics, Vol.14, No.4, pp.99-115.10.1680/ijpmg.14.00016
6
6.Det Norske Veritas (2007), “Design of Offshore Wind Turbine Structures”, Offshore standard DNV-OS-J101.
7
7.Foglia, A., Ibsen, L. B., Nicolai, G., and Andersen, L. V. (2014), “Obsevations on Bucket Foundations under Cyclic Loading in Dense Saturated Sand”, Proceedings of the 8th international conference of physical modelling in geotechnics (ICPMG), CRC Press.10.1201/b16200-91
8
8.Houlsby, G. T., Ibsen, L. B., and Byrne, B. W. (2005), “Suction Caissons for Wind Turbines”, Frontiers on Offshore Geotechnics (ISFOG 2005)-Gourvenec & Cassidy (eds), Taylor & Francis group, London, ISBN 041539063X, pp.75-93.
9
9.Hung, L. C. and Kim, S. R. (2014), “Evaluation of Undrained Bearing Capacities of Bucket Foundations under Combined Loads”, Marine Georesources and Geotechnology 32, pp.76-92.10.1080/1064119X.2012.735346
10
10.Lee, J. H., Do, J. U., and Kim, S. R. (2015), “A Comparative Study on the Resistances of Bucket Foundation in Sand with Different Installation Methods”, Int. J. of Geomate, Vol.8, No.1, pp.1186-1189. 10.21660/2015.15.4262
11
11.Kelly, R. B., Houlsby, G. T., and Byrne, B. W. (2006), “Transient Vertical Loading of Model Suction Saissons in a Pressure Chamber”, Geotechnique, Vol.56, No.10, pp.665-675.10.1680/geot.2006.56.10.665
12
12.LeBlanc, C., Houlsby, G. T., and Byrne, B. (2010), “Response of Stiff Piles in Sand to Long-term Cyclic Lateral Loading”, Geotechnique, Vol.60, No.2, pp.79-90.10.1680/geot.7.00196
13
13.Lee, S. H., Kim, S. R., Lee, J. Y., and Choi, C. H. (2014), “Develop-ment and Verification of Long-term Cyclic Loading Equipment to Analyze behavior of Foundation of Offshore Wind Turbine”, Korean Geotechnical Engineering, Vol.30, No.10, pp.8-17. (in Korean)
14
14.Luke, A. M., Rauch, A. F., Olson, R. E., and Mecham, E. C. (2005), “Components of Suction Caisson Capacity Measured in Axial Pullout Tests”, Ocean Engineering 32, pp.878-891.10.1016/j.oceaneng.2004.10.007
15
15.Tjelta, T. I. and Haaland, G. (1993), “Novel Foundation Concept for a Jacket Finding its Place”, Offshore site investigation and foundation behaviour 28, pp.717-718.10.1007/978-94-017-2473-9_34
16
16.Wood, D. M. (2004), Geotechnical Modelling, Spon Press, New york, USA. 10.4324/9780203477977
17
17.Villalobos, F. A. (2006), “Model Testing of Foundations for Offshore Wind Turbines”, PhD dissertation, Keble College, University of Oxford.
18
18.Zhu, B., Byrne, B. W., and Houlsby, G. T. (2013), “Long-term Lateral Cyclic Response of Suction Caisson Foundations in Sand”, Journal of Geotechnical and Geoenvironmental Engineering, ASCE, Vol.139, No.1, pp.73-83.10.1061/(ASCE)GT.1943-5606.0000738
Information
  • Publisher :The Korean Geotechnical Society
  • Publisher(Ko) :한국지반공학회
  • Journal Title :Journal of the Korean Geotechnical Society
  • Journal Title(Ko) :한국지반공학회 논문집
  • Volume : 32
  • No :12
  • Pages :69-78
  • Received Date : 2016-09-05
  • Revised Date : 2016-11-04
  • Accepted Date : 2016-11-04