All Issue

2015 Vol.31, Issue 4 Preview Page
Estimation of Attenuation Relationship Compatible with Damping Ratio of Rock Mass from Numerical Simulation

수치해석을 통한 진동감쇠식 맞춤형 암반의 감쇠비 산정

Nag Young Kim1
,
Jae-Ha Ryu2
,
Jae-Kwang Ahn3
,
Duhee Park4*
,
Murak Son5
,
Young-Cheol Hwang6
김 낙영1
,
류 재하2
,
안 재광3
,
박 두희4*
,
손 무락5
,
황 영철6
1Research Director, Expressway & Transportation Research Institute, Korea Expressway Corp.
2General Manager, Expressway Design Evaluation Division Design Evaluation Team, Korea Expressway Corp.
3Graduate Student, Dept. of Civil and Env. Engr., Hanyang Univ.
4Associate Prof., Dept. of Civil and Env. Engineering., Hanyang Univ.
5Prof., Dept. of Civil Engr, Daegu Univ.
6Prof., Dept. of Civil and Engr., Sangji Univ.
1한국도로공사 기술심사처 수석연구원
2한국도로공사 도로교통연구원 기술심의팀
3한양대학교 건설환경공학과 박사과정
4한양대학교 건설환경공학과 부교수
5대구대학교 토목공학과 교수
6상지대학교 건설시스템공학과 교수
*교신저자. *Corresponding Author. 
30 April 2015. pp. 45-55
PDF XML Citation
Abstract

The stability of the adjcent structures or slopes under blasting is typically evaluated using an empirical vibration attenuation curve or dynamic numerical analysis. To perform a dynamic analysis, it is necessary to determine the blast load and the damping ratio of rock mass. Various empirical methods have been proposed for the blast load. However, a study on representative values of damping ratio of a rock mass has not yet been performed. Therefore, the damping ratio was either ignored or selected without a clear basis in performing a blast analysis. Selection of the dampring ratio for the rock mass is very difficult because the vibration propagation is influenced by the layout and properties of the rock joints. Besides, the vibration induced by blasting is propagated spherically, whereas plane waves are generated by an earthquake. Since the geometrical spreading causes additional attenuation, the damping ratio should be adjusted in the case of a 2D plane strain analysis. In this study, we proposed equivalent damping ratios for use in continuum 2D plane strain analyses. To this end, we performed 2D dynamic analyses for a wide range of rock stiffness and investigated the characteristics of blast vibration propagation. Based on numerical simulations, a correlation between the attenuation equation, shear wave velocity, and equivalent damping ratio of rock mass is presented. This novel approach is the first attempt to select the damping ratio from an attenuation relationship. The proposed chart is easy to be used and can be applied in practice.

Keywords
Blast induced vibration
Equivalent damping ratio
Attenuation curve
Dynamic analysis
Plane strain condition

발파에 대한 주변 구조물이나 사면의 안정성은 경험적 진동감쇠식 또는 발파진동 동적 수치해석을 통하여 평가한다. 동적해석을 수행하기 위해서는 발파하중과 지반 감쇠비의 산정이 필요하다. 발파하중에 대해서는 다양한 경험적 방법이 제시되었지만 암반의 감쇠비에 대한 연구는 제한적이며 해석 시 이를 무시하거나 명확한 근거 없이 가정하여 해석에 적용하고 있다. 암반의 감쇠비는 절리의 영향을 크게 받으므로 이를 고려해서 산정해야 한다. 또한, 평면파로 가정할 수 있는 지진파와는 다르게 발파 시에는 구면파가 생성되며 이를 2차원 해석에서 모사하는 경우에는 이의 기하학적 확산을 고려하기 위하여 감쇠비를 조정해야 한다. 본 연구에서는 위의 두 가지 영향이 고려된 2차원 평면변형률 연속체 해석에 적용 가능한 암반의 등가감쇠비를 제안하였다. 이를 위하여 다양한 강성의 암반에 대한 2차원 동적해석을 수행하여 암반의 감쇠비에 따른 진동전파 특성을 분석하였으며 해석결과를 기반으로 진동감쇠식-전단파속도-등가감쇠비와의 상관관계를 규명하였다. 제시된 상관관계는 경험적 진동감쇠식에 상응하는 감쇠비를 산정한 최초의 시도로 중요한 의미가 있으며 동시에 실무에도 쉽게 적용될 수 있는 유용한 방법이다.

References
1
1.Ang, K. and Valliappan, S. (1988), “Pseudo-plane Strain Analysis of Wave Propagation Problems Arising from Detonations of Explosives in Cylindrical Boreholes”, International journal for numerical and analytical methods in geomechanics, Vol.12, No.3, pp.301-322.
2
2.Chen, S., Cai, J., Zhao, J., and Zhou, Y. (2000), “Discrete Element Modelling of an Underground Explosion in a Jointed Rock Mass”, Geotechnical & Geological Engineering, Vol.18, No.2, pp.59-78.
3
3.Choi, H. B. and Won, W. H. (2010), “Comparative Study on the Characteristics of Ground Vibrations Produced from Borehole Test Using Electronic and Electric Detonators”, Journal of Korean Society of Explosives & Blasting Engineering, Vol.28, No.2, pp.37-49.
4
4.Choi, S. O., Park, E. S., Sunwoo, C., and Chung, S. K. (2004), “A Study on the Blasting Dynamic Analysis Using the Measurement Vibration Waveform”, Journal of Korean Society for Rock Mechanics, Vol.14, No.2, pp.108-120.
5
5.Deng, X. F., Zhu, J. B., Chen, S. G., Zhao, Z. Y., Zhou, Y. X., and Zhou, X. Y. (2014), “Numerical Study on Tunnel Damage Subject to Blast-induced Shock Wave in Jointed Rock Masses”, Tunnelling and Underground Space Technology, Vol.43, pp.88-100.
6
6.Dowding, C. (1996), Construction vibrations, Prentice Hall, pp. 41-60.
7
7.Hao, H., Wu, Y., Ma, G., and Zhou, Y. (2001), “Characteristics of Surface Ground Motions Induced by Blasts in Jointed Rock Mass”, Soil Dynamics and Earthquake Engineering, Vol.21, No.2, pp.85-98.
8
8.Hino, K. (1956), Fragmentation of Rock through Blasting and Shock Wave; Theory of Blasting, Quarterly of the Colorado School of Mines.
9
9.Itasca (2004), UDEC:Universal Distinct Element Code, User, Minneapolis: Itasca Consulting Group, Inc.
10
10.Itasca (2011), FLAC:Fast Lagrange Analysis of Continua, Version 7.0, Minneapolis: Itasca Consulting Group, Inc.
11
11.Jeon, S. S., Kim, D. S., and Jang, Y. W. (2007), “Stability Assessment of Concrete Lining and Rock Bolt of the Adjacent Tunnel by Blast-induced Vibration”, Journal of Korean Geotechnical Society, Vol.23, No.10, pp.33-45.
12
12.Kim, D. S. and Lee, J. S. (2000), “Propagation and Attenuation Characteristics of Various Ground Vibrations”, Soil Dynamics and Earthquake Engineering, Vol.19, No.2, pp.115-126.
13
13.Kim, S. I., Jeong, S. S., and Cho, H. Y. (1994), “The Reliability of Blast Vibration Equation”, Journal of the Korean Society of Civil Engineers, Vol.14, No.3, pp.573-582.
14
14.Konya, C. J. and Walter, E. J. (1991), Rock blasting and overbreak control, National Highway Institute, pp.5.
15
15.Kuhlemeyer, R. L. and Lysmer, J. (1973), “Finite Element Method Accuracy for Wave Propagation Problems”, Journal of Soil Mechanics & Foundations Div, Vol. 99, Tech Rpt.
16
16.Liu, Q. and Tidman, P. (1995), “Estimation of the Dynamic Pressure around a Fully Loaded Blast Hole”: Retrieved from Canmet Mrl Experimental Mine.
17
17.Lysmer, J. and Kuhlemeyer, R. (1969), “Finite Element Model for Infinite Media”, Journal of Engineering Mechanics Division. ASCE, Vol.95, pp.859-877.
18
18.Ma, G., Li, J., and Zhao, J. (2011), “Three-phase Medium Model for Filled Rock Joint and Interaction with Stress Waves”, International journal for numerical and analytical methods in geomechanics, Vol.35, No.1, pp.97-110.
19
19.Park, D. H., Cho, Y. G., and Jeon, S. W. (2006), “A Case Study on the Blasting Analysis of Slope Using Monitored Vibration Waveform”, Journal of Korean Society of Explosives & Blasting Engineering, Vol.24, No.2, pp.41-50.
20
20.Park, D., Shin, J. H., and Yun, S. U. (2010), “Seismic Analysis of Tunnel in Transverse Direction part II: Evaluation of Seismic Tunnel Response via Dynamic Analysis”, Journal of Korean Geotechnical Society, Vol.26, pp.71-85.
21
21.Persson, P. A., Holmberg, R., and Lee, J. (1993), Rock blasting and explosives engineering, CRC press.
22
22.Shin, J. H., Moon, H. G., and Chae, S. E. (2011), “Effect of Blast- induced Vibration on Existing Tunnels in Soft Rocks”, Tunnelling and Underground Space Technology, Vol.26, No.1, pp.51-61.
23
23.Torano, J., Rodríguez, R., Diego, I., Rivas, J. M., and Casal, M. D. (2006), “FEM Models Including Randomness and Its Application to the Blasting Vibrations Prediction”, Computers and Geotechnics, Vol.33, No.1, pp.15-28.
24
24.Wiss, J. (1981), “Construction Vibrations: State-of-the-art”, Journal of the Geotechnical Engineering Division, Vol.107, No.2, pp.167-181.
25
25.Yan, W. M., Tham, L. G., and Yuen, K. V. (2013), “Reliability of Empirical Relation on the Attenuation of Blast-induced Vibrations”, International Journal of Rock Mechanics and Mining Sciences, Vol.59, pp.160-165.
26
26.Yang, H. S., Lim, S. S., and Kim, W. B. (2003), “Tunnel Blasting Design with Equation Obtained from Borehole and Crater Blasting”, Journal of Korean Geotechnical Society, Vol.19, No.5, pp.327-333.
Information
  • Publisher :The Korean Geotechnical Society
  • Publisher(Ko) :한국지반공학회
  • Journal Title :Journal of the Korean Geotechnical Society
  • Journal Title(Ko) :한국지반공학회 논문집
  • Volume : 31
  • No :4
  • Pages :45-55
  • Received Date : 2015-03-11
  • Revised Date : 2015-04-10
  • Accepted Date : 2015-04-13
  • DOI :https://doi.org/10.7843/kgs.2015.31.4.45
Journal Informaiton Journal of the Korean Geotechnical Society Journal of the Korean Geotechnical Society
Archives
: Vol.23~28 (2007~2012)
  • NRF
  • KOFST
  • KISTI Current Status
  • KISTI Cited-by
  • crosscheck
  • orcid
  • open access
  • ccl
Journal Informaiton Journal Informaiton - close