All Issue

2026 Vol.42, Issue 5 Preview Page
31 October 2026. pp. 87-96
Abstract
References
1

Baecher, G.B. and Christian, J.T. (2003), Reliability and Statistics in Geotechnical Engineering, John Wiley & Sons Ltd., Chichester, England.

2

Cami, B., Javankhoshdel, S., Phoon, K.K., and Ching, J. (2020), “Scale of Fluctuation for Spatially Varying Soils: Estimation Methods and Values”, ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part A: Civil Engineering, Vol.6, No.4, 03120002, https://doi.org/10.1061/AJRUA6.0001083.

10.1061/AJRUA6.0001083
3

Chang, Y.C., Ching, J., Phoon, K.K., and Yue, Q. (2021), “On the Hole Effect in Soil Spatial Variability”, ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part A: Civil Engineering, Vol.7, No.4, 04021039, https://doi.org/10.1061/AJRUA6.0001168.

10.1061/AJRUA6.0001168
4

Fei, S., Tan, X., Lin, X., Xiao, Y., Zha, F., and Xu, L. (2022), “Evaluation of the Scale of Fluctuation based on Variance Reduction Method”, Engineering Geology, Vol.308, 106804, https://doi.org/10.1016/j.enggeo.2022.106804.

10.1016/j.enggeo.2022.106804
5

Firouzianbandpey, S., Griffiths, D.V., Ibsen, L.B., and Andersen, L.V. (2014), “Spatial Correlation Length of Normalized Cone Data in Sand: Case Study in the North of Denmark”, Canadian Geotechnical Journal, Vol.51, No.8, pp.844-857, https://doi.org/10.1139/cgj-2013-0294.

10.1139/cgj-2013-0294
6

Jaksa, M.B., Brooker, P.I., and Kaggwa, W.S. (1997), “Inaccuracies Associated with Estimating Random Measurement Errors”, Journal of Geotechnical and Geoenvironmental Engineering, Vol.123, No.5, pp.393-401, https://doi.org/10.1061/(ASCE)1090-0241(1997)123:5(393).

10.1061/(ASCE)1090-0241(1997)123:5(393)
7

Liu, Z., Amdal, Å.M.W., L'Heureux, J.S., Lacasse, S., Nadim, F., and Xie, X. (2020), “Spatial Variability of Medium Dense Sand Deposit”, AIMS Geosciences, Vol.6, No.1, pp.6-30, https://doi.org/10.3934/geosci.2020002.

10.3934/geosci.2020002
8

Macedo, J., Vergaray, L., Liu, C., Sharp, J., Morrison, K.F., and Byler, B. (2024), “CPTu-based Spatial Variability Assessment of Thickened and Conventional Mine Tailings”, Journal of Geotechnical and Geoenvironmental Engineering, Vol.150, No.10, 04024091, https://doi.org/10.1061/JGGEFK.GTENG-11969.

10.1061/JGGEFK.GTENG-11969
9

Mayne, P.W., Cargill, E., and Greig, J. (2023), The Cone Penetration Test: Better Information, Better Decisions: A CPT Design Parameter Manual, First Edition, ConeTec Group, Burnaby, B.C., Canada.

10

Phoon, K.K. and Kulhawy, F.H. (1999), “Characterization of Geotechnical Variability”, Canadian Geotechnical Journal, Vol.36, No.4, pp.612-624, https://doi.org/10.1139/t99-038.

10.1139/t99-038
11

Robertson, P.K. (2016), “Cone Penetration Test (CPT)-based Soil Behaviour Type (SBT) Classification System—An Update”, Canadian Geotechnical Journal, Vol.53, No.12, pp.1910-1927, https://doi.org/10.1139/cgj-2016-0044.

10.1139/cgj-2016-0044
12

Stuedlein, A.W., Kramer, S.L., Arduino, P., and Holtz, R.D. (2012), “Geotechnical Characterization and Random Field Modeling of Desiccated Clay”, Journal of Geotechnical and Geoenvironmental Engineering, Vol.138, No.11, pp.1301-1313, https://doi.org/10.1061/(ASCE)GT.1943-5606.0000723.

10.1061/(ASCE)GT.1943-5606.0000723
13

Uzielli, M., Vannucchi, G., and Phoon, K.K. (2005), “Random Field Characterisation of Stress-normalised Cone Penetration Testing Parameters”, Géotechnique, Vol.55, No.1, pp.3-20, https://doi.org/10.1680/geot.2005.55.1.3.

10.1680/geot.2005.55.1.3
14

Xiao, T., Li, D.Q., Cao, Z.J., and Zhang, L.M. (2018), “CPT-based Probabilistic Characterization of Three-dimensional Spatial Variability Using MLE”, Journal of Geotechnical and Geoenvironmental Engineering, Vol.144, No.5, 04018023, https://doi.org/10.1061/(ASCE)GT.1943-5606.0001875.

10.1061/(ASCE)GT.1943-5606.0001875
Information
  • Publisher :The Korean Geotechnical Society
  • Publisher(Ko) :한국지반공학회
  • Journal Title :Journal of the Korean Geotechnical Society
  • Journal Title(Ko) :한국지반공학회 논문집
  • Volume : 42
  • No :5
  • Pages :87-96
  • Received Date : 2026-08-14
  • Revised Date : 2026-09-29
  • Accepted Date : 2026-10-12