ASTM D6951 (2009), Standard Test Method for Use of the Dynamic Cone Penetrometer in Shallow Pavement Applications, ASTM International, West Conshohocken, PA, USA.
Bies, D. A., Hansen, C., and Howard, C. (2017), Engineering Noise Control, CRC Press, 826.
10.1201/9781315273464Dassios, K. G., Kordatos, E. Z., Aggelis, D. G., and Matikas, T. E. (2014), “Crack Growth Monitoring in Ceramic Matrix Composites by Combined Infrared Thermography and Acoustic Emission”, Journal of the American Ceramic Society, 97(1), 251-257, https://doi.org/10.1111/jace.12592.
10.1111/jace.12592Davis, A. G. (2003), “The Nondestructive Impulse Response Test in North America: 1985–2001”, NDT & E International, 36(4), 185-193, https://doi.org/10.1016/S0963-8695(02)00065-8.
10.1016/S0963-8695(02)00065-8Gholizadeh, S., Leman, Z., and Baharudin, B. T. H. T. (2015), “A Review of the Application of Acoustic Emission Technique in Engineering”, Structural Engineering and Mechanics, 54(6), 1075-1095, http://dx.doi.org/10.12989/sem.2015.54.6.1075.
10.12989/sem.2015.54.6.1075Hong, W. T., Kang, S., Lee, S. J., and Lee, J. S. (2018), “Analyses of GPR Signals for Characterization of Ground Conditions in Urban Areas”, Journal of Applied Geophysics, 152, 65-76, https://doi.org/10.1016/j.jappgeo.2018.03.005.
10.1016/j.jappgeo.2018.03.005Kang, S., Yu, J. D., Hong, W. T., and Lee, J. S. (2021), “Estimation of Cavities Beneath Plate Structures Using a Microphone: Laboratory Model Tests”, Sensors, 21(9), 2941, https://doi.org/10.3390/s21092941.
10.3390/s2109294133922178PMC8122737Kang, S., Yu, J. D., Han, W., and Lee, J. S. (2022a), “Nondestructive Detection of Cavities Beneath Concrete Plates Using Ground Penetrating Radar and Microphone”, NDT & E International, 130, 102663, https://doi.org/10.1016/j.ndteint.2022.102663.
10.1016/j.ndteint.2022.102663Kang, S., Lee, J. S., Han, W., Kim, S. Y., and Yu, J. D. (2022b), “Detection of Cavities Behind Concrete Walls Using a Microphone”, Journal of the Korean Geotechnical Society, 38(12), 19-28, https://doi.org/10.7843/kgs.2022.38.12.19.
10.7843/kgs.2022.38.12.19Kang, S., Lee, J. S., Park, G., Kim, N., and Park, J. (2023), “Unpaved Road Characterization during Rainfall Scenario: Electromagnetic Wave and Cone Penetration Assessment”, NDT & E International, 139, 102930, https://doi.org/10.1016/j.ndteint.2023.102930.
10.1016/j.ndteint.2023.102930Kang, S., Lee, J. S., Kim, N., Lee, D., and Park, J. (2024), “Detection of Air-and Water-filled Cavities Beneath Concrete Plate Using Electromagnetic and Acoustic Waves”, NDT & E International, 144, 103103, https://doi.org/10.1016/j.ndteint.2024.103103.
10.1016/j.ndteint.2024.103103Kang, S., Lee, J. S., Yoo, Y., and Kim, S. Y. (2025a), “Soil Compaction Assessment on Unpaved Road Surfaces Using Ground Penetrating Radar and Time Domain Reflectometry”, Measurement, 256, 118245, https://doi.org/10.1016/j.measurement.2025.118245.
10.1016/j.measurement.2025.118245Kang, S., Park, G., Kim, N., Tutumluer, E., and Lee, J. S. (2025b), “GPR-based Depth Estimation of Ground Interfaces in Permafrost Region: Electromagnetic Method and Cone Penetration Assessment”, Measurement, 242, 116158, https://doi.org/10.1016/j.measurement.2024.116158.
10.1016/j.measurement.2024.116158Kang, S., Park, G., Kim, S., Kang, T. H., and Lee, J. S. (2025c), “Evaluation of Rutting Depth in Unpaved Roads Using Electromagnetic Wave Techniques”, Steel and Composite Structures, 56(5), 365-374, https://doi.org/10.12989/scs.2025.56.5.365.
10.12989/scs.2025.56.5.365Kang, S., Yu, J. D., Lee, D., and Lee, J. S. (2025d), “Investigating the Unbonded Sections of Fully Grouted Rock Bolts Using a Microphone”, Transportation Geotechnics, 51, 101488, https://doi.org/10.1016/j.trgeo.2025.101488.
10.1016/j.trgeo.2025.101488Kim, G., You, Y., Jung, C., Shin, M., and Cho, H. (2022), “A Study on Unsupported Sleepers Detection through Analysis of Train Axle Box Acceleration Frequency”, Journal of Korean Society for Urban Railway, 10(2), 1245-1254, https://doi.org/10.24284/JKOSUR.2022.06.10.2.1245.
10.24284/JKOSUR.2022.06.10.2.1245Kim, D. S. (2025), “Influence of EPDM under Sleeper Pad on the Behavior of Ballasted Track”, Journal of the Korea Academia-Industrial cooperation Society, 26(5), 330-335, https://doi.org/10.5762/KAIS.2025.26.5.330.
10.5762/KAIS.2025.26.5.330Larson, G. D., Martin, J. S., and Scott, W. R. (2007), “Investigation of Microphones as Near-ground Sensors for Seismic Detection of Buried Landmines”, The Journal of the Acoustical Society of America, 122(1), 253-258, https://doi.org/10.1121/1.2743155.
10.1121/1.2743155Lee, D. W., Park, Y. G., and Choi, J. Y. (2011), “A Study on the Evaluation of Track Support Stiffness on the Various Track Type in Urban Transit”, Journal of the Korean Society for Railway, 14(3), 262-270, https://doi.org/10.7782/JKSR.2011.14.3.262.
10.7782/JKSR.2011.14.3.262Nazarian, S. and Reddy, S. (1996), “Study of Parameters Affecting Impulse Response Method”, Journal of Transportation Engineering, 122(4), 308-315, https://doi.org/10.1061/(ASCE)0733-947X(1996)122:4(308).
10.1061/(ASCE)0733-947X(1996)122:4(308)Rojas-Vivanco, J., Breul, P., Talon, A., García, J., Navarrete, M. B., and Villavicencio, G. (2025), “Assessment of Railway Ballast Fouling Using GPR and AI-Based Learning from LDCP and Geoendoscopy Data”, Transportation Geotechnics, 101701, https://doi.org/10.1016/j.trgeo.2025.101701.
10.1016/j.trgeo.2025.101701Ryden, N., Lowe, M. J., Cawley, P., and Park, C. B. (2006, April), “Non-contact Surface Wave Measurements Using a Microphone”, In 19th EEGS Symposium on the Application of Geophysics to Engineering and Environmental Problems (pp. cp-181). European Association of Geoscientists & Engineers, https://doi.org/10.3997/2214-4609-pdb.181.114.
10.3997/2214-4609-pdb.181.114Salloum, T., Pernica, G., Glazer, R., and Law, K. T. (2003), Using the Impulse Response Technique to Estimate the Length of In-situ Soil Nails, Carleton University.
Sansalone, M. J. and Streett, W. B. (1997), Impact-echo. Nondestructive Evaluation of Concrete and Masonry.
Seo, S. B. (2021), “Dynamic Behavior of a Track with a Void beneath the Sleeper (In Korean)”, Railway Journal, 24(4), 26-37.
Tong, F., Tso, S. K., and Xu, X. M. (2006), “Tile-wall Bonding Integrity Inspection based on Time-domain Features of Impact Acoustics”, Sensors and actuators A: Physical, 132(2), 557-566, https://doi.org/10.1016/j.sna.2005.12.035.
10.1016/j.sna.2005.12.035Wang, S., Liu, G., Jing, G., Feng, Q., Liu, H., and Guo, Y. (2022), “State-of-the-art Review of Ground Penetrating Radar (GPR) Applications for Railway Ballast Inspection”, Sensors, 22(7), 2450, https://doi.org/10.3390/s22072450.
10.3390/s2207245035408065PMC9003199Zhu, J. and Popovics, J. S. (2005), “Non-contact Imaging for Surface-opening Cracks in Concrete with Air-coupled Sensors”, Materials and Structures, 38(9), 801-806, https://doi.org/10.1007/BF02481652.
10.1007/BF02481652Zhu, J. and Popovics, J. S. (2007), “Imaging Concrete Structures Using Air-coupled Impact-echo”, Journal of Engineering Mechanics, 133(6), 628-640, https://doi.org/10.1061/(ASCE)0733-9399(2007)133:6(628).
10.1061/(ASCE)0733-9399(2007)133:6(628)- Publisher :The Korean Geotechnical Society
- Publisher(Ko) :한국지반공학회
- Journal Title :Journal of the Korean Geotechnical Society
- Journal Title(Ko) :한국지반공학회 논문집
- Volume : 42
- No :5
- Pages :141-150
- Received Date : 2026-09-30
- Revised Date : 2026-10-15
- Accepted Date : 2026-10-16
- DOI :https://doi.org/10.7843/kgs.2026.42.5.141


Journal of the Korean Geotechnical Society







