All Issue

2016 Vol.32, Issue 10 Preview Page
Optimal Design Conditions of Retaining Wall with Relieving Platform through Real-Scale Numerical Analysis

실단면 수치해석을 통한 선반식 옹벽의 최적 설계 조건

In-Jong Moon1
,
Byoung-Il Kim1*
,
Jin-Tae Han2
,
Stuedlein Armin W.3
문 인종1
,
김 병일1*
,
한 진태2
,
Armin W. Stuedlein3
*교신저자. *Corresponding Author. 
31 October 2016. pp. 55-65
PDF XML Citation
Abstract

Retaining wall with relieving platform has advantages in terms of stability and costs because it decreases the earth pressure by installing the relieving platform. However, there have not been previous studies of the optimal design for the retaining wall with reliving platform in practice. In this study, the optimal design conditions of the retaining wall with relieving platform are proposed by evaluating the reduction effect of lateral earth pressure based on the numerical analysis of 40 cross sections by changing wall types, wall heights, shelf locations and lengths. As a result, the optimal location of a shelf is the central part of a retaining wall (h/H=0.50) and the optimal length is recommended to be designed to satisfy b/L=0.45, at least.

Keywords
Retaining wall, Relieving platform
Numerical analysis
Earth pressure
Optimal design

캔틸레버식 옹벽의 단점을 보완하고자 개발된 선반식 옹벽은 선반 설치로 인해 옹벽에 작용하는 수평토압 크기가 감소하고 그로 인해 안정성 및 경제성에서 우수하다. 하지만 현장 적용을 위한 선반식 옹벽의 최적 설계에 대한 연구는 아직 진행된 바 없다. 본 연구에서는 옹벽 종류, 선반 위치 및 길이 등의 조건을 변화시켜 총 40개 단면에 대해 수치해석을 수행하였으며, 수평토압 감소효과와 안정성 검토를 통해 선반식 옹벽의 최적 설계 조건을 제시하고자 하였다. 연구결과, 선반식 옹벽 설계 시 선반의 최적 위치는 h/H=0.50, 최적 길이는 최소 b/L=0.45 이상을 만족하도록 설계하는 것이 가장 바람직한 것으로 나타났다.

References
1
1.Bell, F. G. (1987), Ground Engineer’s Reference Book, Butterworths, London, pp.47/16-47/18.
2
2.Das, B. M. (1995), Principles of Foundation Engineering, Sixth Edition, THOMSON, pp.60-120.
3
3.Hunt, R. E. (1984), Geotechnical Engineering Investigation Manual, McGraw-Hill Book Company, p.305.
4
4.Jumikis, A. R. (1964), Mechanics of Soils, D. Van Nostrand Compan Inc, Princeton NJ.
5
5.Kim, B. I., Yoo, W. K., Yang, M. R., and Park, Y. S. (2012), “Model Test Study on the Earth Pressure of the Retaining Wall with the Relieving Platform”, Journal of Korean Society of Civil Engineers, Vol.32, No.1C, pp.27-35.
6
6.Kim, B. I., Yoon, C. Y., Cho, W. J., and Kim, T. S. (2015), Design of Geotechnical Structures, CIR, Seoul, pp.15-55.
7
7.Liu, F. and Lin, S. (2008), “Earth Pressure Calculation for Retaining Structure with Relieving Platform”, Port Engineering Technology, Aug. 2008, Total 182, No.4.
8
8.Moon, I. J. (2016), Earth Pressure Characteristics of Retaining Wall with Relieving Platform Using Model Test and Numerical Analysis, Ph.D. Thesis, Myongji University.
9
9.Moon, I. J., Kim, B. I., and Yoo, W. K. (2014), “Numerical Analysis for Lateral Earth Pressure on Retaining Wall with Relieving Platform Backfilled with Jumoonjin Sand”, Journal of Korea Academia- Industrial cooperation Society, Vol.15, No.6, pp.3916-3922.
10
10.Oh, J. (2001), Development of An Expert System for Designing RC Retaining Walls, Master’s Thesis, Chonnam National University.
11
11.Padhye, R. D. and Ullagaddi, P. B. (2005), Retaining Wall with Shelves-A Review Study, All India Seminars on Advances in Geotechnical Engineering, National Institute of Technology, Rourkela, pp.62-68.
12
12.Paik, K. H. and Salgado, R. (2003), “Estimation of Active Earth Pressure against Rigid Retaining Walls Considering Arching Effects”, Geotechnique, 53, No.7, pp.643-653.
13
13.Ray Chaudhuri, P. (1973), “Design of Retaining Walls with Relieving Shelves”, IRC Journal, Vol.35(2), pp.289-325.
14
14.Schanz, T., Vermeer, P. A., and Bonnier, P. G. (1999), “The Hardening Soil Model: Formulation and Verification”, Beyond 2000 in Computational Geotechnics, pp.281-296.
15
15.Yang, M. R., Piao, M., Yoo, W. K., Kim, B. I., Park, C. Y., and Park, Y. S. (2011), “An Experimental Study on the Earth Pressure of the Retaining Wall with the Relieving Platform”, KGS Fall National Conference 2011, pp.656-665.
16
16.Yoo, W. K., Kim, B. I., Moon, I. J., and Park, Y. S. (2012), “Comparison of the Lateral Earth Pressure on the Retaining Wall with the Relieving Platform by Model Test and Numerical Analysis”, Journal of Korea Academia-Industrial cooperation Society, Vol.13, No.5, pp.2382-2389.
Information
  • Publisher :The Korean Geotechnical Society
  • Publisher(Ko) :한국지반공학회
  • Journal Title :Journal of the Korean Geotechnical Society
  • Journal Title(Ko) :한국지반공학회 논문집
  • Volume : 32
  • No :10
  • Pages :55-65
  • Received Date : 2016-09-06
  • Revised Date : 2016-09-23
  • Accepted Date : 2016-10-04
  • DOI :https://doi.org/10.7843/kgs.2016.32.10.55
Journal Informaiton Journal of the Korean Geotechnical Society Journal of the Korean Geotechnical Society
Archives
: Vol.23~28 (2007~2012)
  • NRF
  • KOFST
  • KISTI Current Status
  • KISTI Cited-by
  • crosscheck
  • orcid
  • open access
  • ccl
Journal Informaiton Journal Informaiton - close