All Issue

2026 Vol.42, Issue 5 Preview Page
31 October 2026. pp. 49-60
Abstract
References
1

ASTM D 854, A. (2014), Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer, ASTM International: West Conshohocken, PA, USA.

2

ASTM D 4318. (2010), Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils, American Society for the Testing and Materials, ASTM Book of Standards Soil and Rock (I), D420–D5876(4).

3

Atkinson, J. (1993), An Introduction to the Mechanics of Soils and Foundations, London, UK: McGraw-Hill International Limited.

4

Atterberg, A. (1911), Die Plastizitat der Tone. Int. Mitt. Bodenkd. 1, pp.10-43 (in German).

5

BS 1377 - 2. (1990), Methods of Test for Soils for Civil Engineering Purposes, Classification Tests. British Standards Institution.

6

Dumbleton, M. J. and West, G. (1970), The Suction and Strength of Remoulded Soils as Affected by Composition, CABI Digital Library.

7

Feng, T. W. (2000), “Fall-cone Penetration and Water Content Relationship of Clays”, Geotechnique, Vol.50, No.2, pp.181-187.

10.1680/geot.2000.50.2.181
8

Feng, T. W. (2001), “A Linear Log d Log w Model for the Determination of Consistency Limits of Soils”, Canadian Geotechnical Journal, Vol.38, No.6, pp.1335-1342.

10.1139/t01-061
9

Feng, T. W. (2004), “Using a Small Ring and a Fall-cone to Determine the Plastic Limit”, Journal of Geotechnical and Geoenvironmental Engineering, Vol.130, No.6, pp.630-635, https://doi.org/10.1061/(ASCE)1090-0241(2004)130:6(630).

10.1061/(ASCE)1090-0241(2004)130:6(630)
10

Haigh, S. K., Vardanega, P. J., and Bolton, M. D. (2013), “The Plastic Limit of Clays”, Geotechnique, Vol.63, No.6.

10.1680/geot.11.P.123
11

Hansbo, S. (1957), New Approach to the Determination of the Shear Strength of Clay by the Fall-cone Test.

12

Harison, J. A. (1988), “Using the BS Cone Penetrometer for the Determination of the Plastic Limit of Soils”, Geotechnique, Vol.38, No.3, pp.433-438.

10.1680/geot.1988.38.3.433
13

Kayabali, K. and Tufenkci, O. O. (2010), “Shear Strength of Remolded Soils at Consistency Limits”, Canadian Geotechnical Journal, Vol.47, No.3, pp.259-266. https://doi.org/10.1139/T09-095.

10.1139/T09-095
14

Kim, C.-K., Yeo, J.-S., Moon, Y.-S., Park, H.-Y., and Kim, T.-H. (2017), “Liquid and Plastic Limits of Cohesive Soil by Static and Dynamic Test Methods and Tester”, Journal of the Korean Geotechnical Society, Vol.33 No.3, pp.5-15.

10.7843/KGS.2017.33.3.5
15

Kodikara, J., Seneviratne, H. N., and Wijayakulasooriya, C. V. (1986), “Evaluation of Plastic Limit and Plasticity Index by Cone Penetrometer”, In Proc., Asian Regional Symp. on Geotechnical Problems and Practices in Foundation Engineering. Sri Lanka: National Building Research Organisation., 1, 229-233.

16

Kodikara, J., Seneviratne, H. N., and Wijayakulasooryia, C. V. (2006), “Discussion of “Using a Small Ring and a Fall-cone to Determine the Plastic Limit By Tao-Wei Feng”, Journal of Geotechnical and Geoenvironmental Engineering, Vol.132, No.2, pp.276-278.

10.1061/(ASCE)1090-0241(2006)132:2(276)
17

Koumoto, T. and Houlsby, G. T. (2001), “Theory and Practice of the Fall Cone Test”, Géotechnique, Vol.51, No.8, pp.701-712.

10.1680/geot.2001.51.8.701
18

Kumar, A. and Lingfa, P. (2020), “Sodium Bentonite and Kaolin Clays: Comparative Study on their FT-IR, XRF, and XRD”, Materials Today: Proceedings, 22, pp.737-742.

10.1016/j.matpr.2019.10.037
19

O’Kelly, B. C. (2013), “Atterberg Limits and Remolded Shear Strength—Water Content Relationships”, Geotechnical Testing Journal, Vol.36, No.6, pp.939-947.

10.1520/GTJ20130012
20

O’Kelly, B. C. and Haigh, S. K. (2025), “Discussion to the Article Undrained Shear Strength Prediction of Clays Using Liquidity Index, by Q. Wang, S. Qiu, H. Zheng, R. Zhang”, Acta Geotech, 20, pp.1495-1498, https://doi.org/10.1007/s11440-024-02385-x.

10.1007/s11440-024-02385-x
21

O’Kelly, B. C., Vardanega, P. J., and Haigh, S. K. (2018), “Use of Fall Cones to Determine Atterberg Limits: A Review”, Geotechnique, Vol.68, No.10, pp.843-856, ICE Publishing. https://doi.org/10.1680/jgeot.17.R.039.

10.1680/jgeot.17.R.039
22

O’Kelly, B. C., Vardanega, P. J., Haigh, S. K., and Barnes, G. E. (2020), “Use of Fall Cones to Determine Atterberg Limit: A Review”, Geotechnique, Vol.70, No.7, pp.647-651), ICE Publishing. https://doi.org/10.1680/jgeot.19.D.003.

10.1680/jgeot.19.D.003
23

Park, S.-S., Nguyen, T.-G., Jeong, S. W., and Fannin, J. (2026), “On the Consistency Limits of Clay Soils”, under Preparation.

24

Salah, M. M., Hammad, M. S., Fayed, A. L., and Ebid, A. M. (2025), “The Influence of Bentonite Content on the Properties of its Mixture with Kaolinite”, Scientific Reports, 15(1), 10982, https://doi.org/10.1038/s41598-025-89001-4.

10.1038/s41598-025-89001-440164690PMC11958666
25

Sharma, B. and Bora, P. K. (2003), “Plastic Limit, Liquid Limit and Undrained Shear Strength of Soil—reappraisal”, Journal of Geotechnical and Geoenvironmental Engineering, Vol.129, No.8, pp.774-777, https://doi.org/10.1061/(ASCE)1090-0241(2003)129:8(774).

10.1061/(ASCE)1090-0241(2003)129:8(774)
26

Skempton, A. W. and Northey, R. D. (1952), “The Sensitivity of Clays”, Geotechnique, Vol.3, No.1, pp.30-53, http://www.emerald.com/jgeot/article-pdf/3/1/30/2499335/geot_1952_3_1_30.pdf.

10.1680/geot.1952.3.1.30
27

Son, M. and Lee, J. (2016), “Study on the Measurement of Liquid Limit Using a Penetration Reisistance of Small Cone in Clay Soil”, Journal of the Korean Geotechnical Society, Vol.32, No.10, pp.5-15.

10.7843/kgs.2016.32.10.5
28

Vardanega, P. J. and Haigh, S. K. (2014), “The Undrained Strength - Liquidity Index Relationship”, Canadian Geotechnical Journal, Vol.51, No.9, pp.1073-1086. https://doi.org/10.1139/cgj-2013-0169.

10.1139/cgj-2013-0169
29

Vardanega, P. J., Hickey, C. L., Lau, K., Sarzier, H. D. L., Couturier, C. M., and Martin, G. (2019), “Investigation of the Atterberg Limits and Undrained Fall-cone Shear Strength Variation with Water Content of Some Peat Soils”, International Journal of Pavement Research and Technology, Vol.12, No.2, pp.131-138, https://doi.org/10.1007/s42947-019-0017-0.

10.1007/s42947-019-0017-0
30

Vardanega, P. J. and Gan, J. S. (2023), “Comparison of Data from Fall-cone and Laboratory Vane Tests to Investigate Undrained Shear Strength for Some Fine-grained Materials”, Proceedings of 17th Danub European Conference on Geotechnical Engineering.

31

Wang, Q., Qiu, S., Zheng, H., and Zhang, R. (2024), “Undrained Shear Strength Prediction of Clays Using Liquidity Index”, Acta Geotech, 19, pp.4325-4342.

10.1007/s11440-023-02107-9
32

Wasti, Y. and Bezirci, M. H. (1985), “Determination of the Consistency Limits of Soils by the Fall Cone Test”, Canadian Geotechnical Journal, Vol.23, No.2, pp.241-246.

10.1139/t86-033
33

Whyte, I. L. (1982), “Soil Plasticity and Strength--a New Approach Using Extrusion”, Ground Engineering, Vol.15, No.1.

34

Wroth, C. P. and Houlsby, G. T. (1985), “Soil Mechanics—Property Characterization and Analysis Procedures”, Proceedings of the Eleventh International Conference on Soil Mechanics and Foundationengineering, San Francisco, Vol.1, pp.1-55. https://doi.org/10.1038/154119b0.

10.1038/154119b0
35

Wroth, C. P. and Wood, D. M. (1978), “The Correlation of Index Properties with Some Basic Engineering Properties of Soils”, Canadian Geotechnical Journal, Vol.15, No.2, pp.137-145.

10.1139/t78-014
36

Zentar, R., Abriak, N. E., and Dubois, V. (2009), “Effects of Salts and Organic Matter on Atterberg Limits of Dredged Marine Sediments”, Applied Clay Science, Vol.42, No.3-4, pp.391-397. https://doi.org/10.1016/j.clay.2008.04.003.

10.1016/j.clay.2008.04.003
Information
  • Publisher :The Korean Geotechnical Society
  • Publisher(Ko) :한국지반공학회
  • Journal Title :Journal of the Korean Geotechnical Society
  • Journal Title(Ko) :한국지반공학회 논문집
  • Volume : 42
  • No :5
  • Pages :49-60
  • Received Date : 2026-08-03
  • Revised Date : 2026-09-01
  • Accepted Date : 2026-09-01