Abstract
References
B.S 8081 (1989), “British Standards Code of Practice for Ground Anchorages”, British Standards Institution, pp.19-31, 34-39. Civil Engineering Services Department Hong Kong (1989), “Model Specification for Prestressed Ground Anchors”, pp.51-65. Coates, D. F. and Yu, Y. S. (1970), “Three Dimensional Stress Distributions Around a Cylindrical Hole and Anchor”, Proc. 2nd Int. Conf. on Rock Mech., Belgrade, pp.175-182. DIN 4125 (1990), “Ground Anchorages-Design, Construction and testing”, German Institute for Standardization, pp.19-31, 34-39. Hong, S. W. (2002), “The Study on Pullout Resistance Characteristic of the Compresssion Anchor by Pullout Test on the Field”, Journal of Advanced Research in Ocean EngineeringJ, Vol.16, No.2, pp. 44-52. Hong, W. P., Yun, J. M., and Song, Y. S. (2004), “Lateral Earth Pressure acting on Anchored Retention Walls installed in Cut Slope”, Journal of the Korean Society of Civil Engineers, Vol.24, No.2C, pp.125-133. Ivering, J. W. (1981), “Development in the Concept of Compression Tube Anchors”, Ground Eng., Vol.14, pp.31-34. Kim, J. H. and Jeong, H. S. (2014), “Characteristics of Multi Load Transfer Ground Anchor System”, Journal of Korean Tunnelling and Underground Space Association, Vol.16, No.01, pp.25-50. Kim, J. H. and Jeong, H. S. (2016), “Ground Anchor Technique for Executives”, first edition, CIR, pp.17-52. Kim, N. K. (2001), “Load Transfer of Tension and Compression Anchors in Weathered Soil”, Journal of the Korean Geotechnical Society, Vol.17, No.3, pp.59-68. Kim, Y. M., Cho, K. W., Kim, W. K., and Kim, H. M. (2004), “Load Distribution and Pullout Capacity of Compression Anchors”, Journal of the Korean Society of Civil Engineers, pp.4219-4224. Lee, J. U. (2014), “Effect of Multi-Compression Type Anchor with the Installation Space of Compression Tube”, Ph D Thesis, Daejin University, pp.75-85. 17.Liao, H., Ou, C., and Shu, S. (1996), “Anchorage Behavior of Shaft Anchors in Alluvial Soil”, J. Geotech. Engrg., Vol.122, Issue 7, pp.526-533. Littlejohn, G. S. (1980), “Design Estimation of Ultimate Load Holding Capacity of Ground Anchors”, Ground Engineering, England, pp.25-39. Ostermayer, H. (1974), “Construction, Carrying Behavior and Creep Characteristics of Ground Anchors”, ICE Conf. on Diaphargm Walls and Anchorages, London, pp.141-151. 20.Ostermayer, H. and Scheele, H. (1977), “Research on Ground Anchors in Non-Cohesive Soils”, Revue Francaise de Geotechnique, Vol.3, pp.92-97. Post-Tensioning Institute (2004), “Recommendations for Prestressed Rock and Soil Anchors”, pp.11-20, 35-50. Sung, H. J. (2012), “Tension Force Monitoring of Ground Anchor Using Fiber Optic Sensors Embedded Tendon”, Ph D Thesis, Chonnam National University, pp.69-144. Sung, H. J., Kim, Y. S., Kim, J. M., and Park, G. H. (2011), “Tension Force Monitoring of Tension Type Ground Anchor Using Optical FBG Sensors”, Journal of the Korean Geotechnical Society, Vol.27, No.6, pp.17-26. Thorburn, S. and Littlejohn, G. S. (1993), “Underpinning and Retention”, Champman & Hall, pp.304-310. Weerasinghe, R. B. and Littlejohn, G. S. (1997), “Load Transfer and Failure of Anchorages in Weak Mudstone”, Ground Anchorages and Anchorages Structures, Thomas Telford ltd, London, pp.34-44
Information
- Publisher :The Korean Geotechnical Society
- Publisher(Ko) :한국지반공학회
- Journal Title :Journal of the Korean Geotechnical Society
- Journal Title(Ko) :한국지반공학회 논문집
- Volume : 33
- No :1
- Pages :39-56
- Received Date : 2016-10-10
- Revised Date : 2016-12-15
- Accepted Date : 2017-01-10
- DOI :https://doi.org/10.7843/kgs.2017.33.1.39


Journal of the Korean Geotechnical Society







