All Issue

2013 Vol.29, Issue 7 Preview Page
Application of Virtual Fixed Point Theory and Discrete Analysis for Pile Bent Structures

단일 현장타설말뚝의 가상고정점 설계 및 분리해석 적용성 평가

Jae-Young Kim1
,
Sang-Seom Jeong2
김 재영1
,
정 상섬2
1Ph.D. Student, Dept. of Civil and Environmental Engrg., Yonsei Univ.
2Prof., Dept. of Civil and Environmental Engrg., Yonsei Univ.
1연세대학교 토목환경공학과 박사과정
2연세대학교 토목환경공학과 교수
교신저자. Corresponding Author. 
31 July 2013. pp. 57-74
PDF XML Citation
Abstract

In this study, the virtual fixed point analysis and 3D full-modeling analysis for pile bent structures are conducted by considering various influencing factors and the applicability of the virtual fixed point theory is discussed. Also, a discrete analysis calculating separately both the superstructure and substructure of pile bent structures is performed on the basis of an equivalent base spring model by taking into account the major influencing parameters such as soil conditions, combined loading and pile diameter. The results show that the settlement and lateral deflection of the virtual fixed point theory are smaller than those of 3D full-modeling analysis. On the other hand, the virtual fixed point analysis overestimates the axial force and bending moment compared with 3D full-modeling analysis. It is shown that the virtual fixed point analysis cannot adequately predict the real behavior of pile bent structures. It is also found that discrete analysis gives similar results of lateral deflection and bending moment to those of unified analysis. Based on this study, it is found that discrete analysis considering column-pile interaction conditions is capable of predicting reasonably well the behavior of pile bent structures. It can be effectively used to perform a more economical design of pile bent structures.

Keywords
Pile bent structures
Virtual fixed point analysis
Discrete analysis
Equivalent base spring model
Unified analysis
Column-pile interactions

본 연구에서는 단일 현장타설말뚝의 가상고정점 해석과 기둥과 말뚝을 3차원 전체 모델링한 해석을 비교·분석하여 가상고정점 해석의 적정성을 평가하였다. 또한, 가상고정점 해석을 보완하기 위하여 단일 현장타설말뚝의 기둥과 말뚝을 분리하여 등가 지반면 스프링 모델을 적용한 분리해석을 수행하였다. 이 때 지반조건, 하중, 말뚝직경 등의 주요 영향인자에 따라 그 거동을 분석하였다. 본 연구결과, 가상고정점을 고려한 해석에서의 침하량과 수평 변위는 전체 모델링한 해석과 비교하여 작게 발생했으나, 축력과 휨모멘트는 크게 나타났다. 따라서 가상고정점을 통한 해석법은 실제 구조물 거동과 다른 단부조건으로 단일 현장타설말뚝의 정확한 거동을 파악하기엔 무리가 있음을 알 수 있었다. 또한, 기둥과 말뚝을 단일부재로 모델링하는 일체해석과 기둥-말뚝의 상호작용을 고려한 분리해석의 결과에는 서로 차이가 없었으며, 이를 통해 기둥-말뚝의 상호작용을 고려한 분리해석은 가상고정점 해석에서 상하부 일체해석으로 넘어가는 중간단계의 비교적 정확하고 경제적인 설계법임을 알 수 있었다.

References
1
1.AASHTO (2002), Standard Specification for Highway Bridges, American Association of State Highway and Transportation Official.
2
2.Ahn, S. Y. (2010), “Proposed New Design Method of the Pile Bent Structure considering plastic hinge”, Ph. D. thesis, Yonsei University (in Korean).
3
3.Chai, Y. H. (2002), “Flexural strength and ductility of extended pile-shafts. I: analytical model”, Journal of Structural Engineering, 128(5), pp.586-594.
4
4.Cho, J. Y. and Jeong, S. S. (2012), “Development of Three- dimensional Approximate Analysis Method for Piled Raft Foundations”, Journal of Korean Geotechnical Society, Korean Geotechnical Society, Vol.28, No.4, pp.67-77 (in Korean).
5
5.FHWA (1987), Drilled Shaft, National Highway Institute.
6
6.Han, K. T. (2008), “Load-Settlement Behavior of the Drilled Shafts subjected to Bi-Directional Loading”, Master thesis, Yonsei University (in Korean).
7
7.Hutchinson, T. C., Boulanger, R. W., Chai, Y. H., and Idriss, I. M. (2002), “Seismic Design and Retrofit of Bridges”, John Wiley & Sons, New York, USA.
8
8.Jeon, K. S. (2004), Design Criteria for Pile Bent Structure, Vol.68, pp.14-27 (in Korean).
9
9.Jeon, K. S., Kim, K. S., and Kim, J. Y. (2006), “Design and construction of single drilled shaft foundation”, Korean Geotechnical Engineer conference, pp.86-100 (in Korean).
10
10.Jeong, S. S. and Cho, J. Y. (2011) “Simplified Analysis of Mega Foundations for Super Tall Buildings”, CTBUH 2011 World Conference, Seoul, Korea.
11
11.Jeong, S. S., Kwak, D. O., and Ahn, S. Y. (2005), “Analysis of Pile-Bent (CIDH Shaft/Column) structure subjected to lateral loading”, Korean Society of Civil Engineers conference, pp.3968-3971 (in Korean).
12
12.Jeong, S. S., Lee, S. J., Cho, J. Y., and Lee, J. H. (2011), “Simplified Analysis Algorithm of Raft & Pile-raft Foundation for High-rise Buildings”, 14th Asian Reginal Conference on Soil Mechanics and Geotechnical Engineering, Hong Kong.
13
13.John, W. (2001), “Cyclic Large Deflection Testing of Shaft Bridges”, Report No. 59A0183, University of California, Los Angeles.
14
14.Kerop, D. J. (2001), “Interaction between soil and full scale drilled shaft under cyclic lateral load”, Ph. D. thesis, University of California, Los Angeles.
15
15.Kim, J. Y., Hwang, T. J., and Jeong, S. S. (2011), “Simplified Analysis of Pile Bent Structures and Minimum Reinforcement ratio”, Journal of Korean Geotechnical Society, Korean Geotechnical Society, Vol.27, No.5, pp.33-43 (in Korean).
16
16.Kim, S. K., Yea, G. G., Kim, G. S., and Choi, Y. K. (2008), “A Case Study on Horizontal Displacement Characteristics for Single Drilled Shaft Foundation, Korean Society of Civil Engineers conference, pp.2017-2020 (in Korean).
17
17.Lee, J. H. and Yang, J. H. (2004), “New Concrete Bridge Column System”, Journal of the Korea concrete institute, Vol.16, No.2,  pp.24～30 (in Korean).
18
18.Ministry of Land, Infrastructure and Transport (2008), Design Criteria for Highway Bridges (in Korean).
19
19.Reese, L. C. and Wright, W. (1977), Drilled Shaft Manual, U. S. Department of Transportation.
20
20.Son, H. S., Choi, I. K., Kang, D. O., and Yang, J. H. (2005), “Design of Single Column Drilled Pier Foundation in Incheon Bridge Viaduct”, Korean Society of Civil Engineers conference, pp.959-962 (in Korean).
21
21.Son, H. S.,Choi, I. K., Lee, S. H., and Yang, J. H. (2006), “Seismic Analysis and Reinforcement Details of Integral Pile Shaft-Column Foundations”, Journal of Earthquake Engineering Society of Korea, pp.300-307 (in Korean).
22
22.Song, H. J. (2008), “Analysis of Single Shaft/Column of Light Rail Transit Structure subjected to Lateral Loading”, Master thesis, Yonsei University (in Korean).
Information
  • Publisher :The Korean Geotechnical Society
  • Publisher(Ko) :한국지반공학회
  • Journal Title :Journal of the Korean Geotechnical Society
  • Journal Title(Ko) :한국지반공학회 논문집
  • Volume : 29
  • No :7
  • Pages :57-74
  • Received Date : 2013-04-17
  • Revised Date : 2013-07-02
  • Accepted Date : 2013-07-04
  • DOI :https://doi.org/10.7843/kgs.2013.29.7.57
Journal Informaiton Journal of the Korean Geotechnical Society Journal of the Korean Geotechnical Society
Archives
: Vol.23~28 (2007~2012)
  • NRF
  • KOFST
  • KISTI Current Status
  • KISTI Cited-by
  • crosscheck
  • orcid
  • open access
  • ccl
Journal Informaiton Journal Informaiton - close